Abstract Selaginella convoluta (Arn.) Spring is a species popularly known as “jericó”, and used in folk medicine as analgesic and anti-inflammatory. This study aimed to investigate in mice the antinociceptive and anti-inflammatory activities of the hexane (Sc-Hex) and chloroform (Sc-CHCl3) fractions (100, 200 and 400 mg/kg) obtained by partition of crude ethanol extract from S. convoluta. The preliminary phytochemical analysis of the fractions was performed. Antinociceptive activity was evaluated by writhing, formalin and hot-plate tests. Anti-inflammatory activity was evaluated using carrageenan-induced pleurisy. The rota-rod test was used to evaluate motor coordination. Preliminary phytochemical screening showed that the Sc-Hex and the Sc-CHCl3 were positive for the presence of flavonoids, anthracene derivatives, quinones, triterpenes and steroids. Inhibition of writhing was observed for fractions tested. The Sc-Hex at all doses tested was effective in reducing the nociceptive behavior produced by formalin only in the second phase. However, the Sc-CHCl3 decreased the paw licking time in the first and second phases. In the hot plate no significant effect was observed for any fraction. In the rota-rod test, treated mice did not demonstrate any significant motor performance changes. In the carrageenan-induced pleurisy, Sc-CHCl3 (200 mg/kg) reduced cell migration to the pleural cavity. These results reveal the antinociceptive properties of S. convoluta , which support, in part, its traditional use, since the fractions did not presented significant activity in the inflammatory response profile. We further verify that this antinociceptive effect could be by activation of nociceptive peripheral pathway.

Resumo Selaginella convoluta é uma espécie popularmente conhecida como “jericó”, e usada na medicina popular como analgésica e anti-inflamatória. Este estudo teve como objetivo investigar em camundongos as atividades antinociceptiva e anti-inflamatória das frações hexânica (Sc-Hex) e clorofórmica (Sc-CHCl3) (100, 200 e 400 mg/kg) obtidas por partição do extrato etanólico bruto de S. convoluta . A análise fitoquímica preliminar das frações foi realizada. A atividade antinociceptiva foi avaliada pelos testes de contorções abdominais, formalina e placa quente. A atividade anti-inflamatória foi avaliada usando pleurisia induzida por carragenina. O teste do rota-rod foi utilizado para avaliar a coordenação motora. A triagem fitoquímica preliminar mostrou que Sc-Hex e Sc-CHCl3 apresentaram reação positiva para a presença de flavonoides, derivados antracênicos, quinonas, triterpenos e esteroides. A inibição das contorções foi observada para as frações testadas. Sc-Hex em todas as doses testadas foi efetivo na redução do comportamento nociceptivo produzido pela formalina somente na segunda fase. No entanto, Sc-CHCl3 diminuiu o tempo de lambida da pata na primeira e segunda fases. Na placa quente, nenhum efeito significativo foi observado para qualquer fração. No teste do rota-rod os camundongos tratados não demonstraram mudanças significativas na coordenação motora. Na pleurisia induzida por carragenina, Sc-CHCl3 (200 mg/kg) reduziu a migração celular para a cavidade pleural. Estes resultados revelam a propriedade antinociceptiva de S. convoluta, justificando, em parte, seu uso tradicional, uma vez que os extratos não apresentaram atividade significativa no perfil de resposta inflamatória. Verificamos ainda que esse efeito antinociceptivo mostrou-se ligado à ativação da via periférica nociceptiva.

ABSTRACT A semi-batch bubble reactor has been developed to produce fatty acid ethyl ester (biodiesel) by acid-catalyzed esterification of oleic acid with superheated ethanol vapor. In this paper, the effects of reaction temperature (110, 130 and 150°C), ethanol volumetric flow rate (1.35, 2.50 and 3.65 mL/min) and vapor bubble size on the reactor performance were evaluated. The results demonstrated that temperature and volumetric flow rate have significant effects on the chemical reaction, gas phase solubility and mass transfer limitations. In addition, the free fatty acid conversion velocity was increased by approximately 56% when a microporous stainless-steel tube was employed to generate and distribute the vapor bubbles inside the reactor, which allowed the process to reach 95% conversion in approximately 40 minutes for the operating temperature of 150°C and volumetric flow rate of 2.5 mL/min.

Resumo Ao longo das últimas décadas, inúmeras pesquisas vêm sendo desenvolvidas com o objetivo de reduzir os impactos ambientais da produção de cimentos e concretos. Por auxiliar na quantificação das cargas ambientais, a técnica de avaliação de ciclo de vida (ACV) oferecem uma perspectiva particularmente útil a tais estudos. Neste artigo, demonstra-se a contribuição da ACV na seleção de concretos de menor impacto ambiental, utilizando componentes para contenção de ondas marinhas (tipo coreloc) como estudo de caso. Um programa experimental teve como objetivo selecionar um ativador alcalino para escória de alto-forno adequado ao processo de produção, avaliar propriedades de corpos-de-prova de concreto e o desempenho de componentes em escala natural, em campo e em laboratório. A ativação da escória de alto-forno por silicato de sódio alcançou os melhores resultados para os critérios de desempenho selecionados. Entretanto, as avaliações de ciclo de vida do ‘berço ao portão’ demonstraram que, apesar de realmente reduzir o potencial de aquecimento global em relação ao concreto com CP V-ARI, o emprego deste ativador traz impactos relevantes em várias categorias ambientais. Estas são informações cruciais para seleção e otimização da dosagem de concretos de menor impacto ambiental, e não seriam detectadas em estudos experimentais exclusivamente orientados a desempenho.

Abstract Over the past decades, extensive research has been carried out to reduce the environmental impacts associated with the cement and concrete production. Life-cycle assessment (LCA) enables the quantification of the environmental loads and offers a useful perspective to scientifically support such studies. In this paper, we demonstrate LCA’s contribution to the selection of low environmental impact concretes, using breakwater coreloc components as a case study. A detailed experimental study was designed for the selection of an alkali activator for blast furnace slag (bfs) to produce concrete suitable for breakwater structures; for the evaluation of concrete properties and for the performance assessment of full scale elements in the field, as well as in the laboratory. Sodium silicate-activated bfs concrete mixtures achieved the best results in terms of performance requirements. Our cradle-to-gate life-cycle assessments showed that, though this chemical activator indeed produces lower global warming potential mixtures than the reference portland CP V-ARI concrete, it induces relevant impacts in several environmental categories. Such information is critical when selecting and optimizing low-impact concrete mixture design, and would not be detected in typical experimental studies that are exclusively guided by compliance with performance requirements.

Abstract Guaco is a common medicinal plant in Brazil used for the treatment of respiratory diseases. Coumarin serves as a chemical marker for quality control of products derived from guaco. In this study, the drying kinetics and coumarin yield of guaco leaves dried with and without treating the surface with ethanol were evaluated. The drying experiments were carried out in a forced convection tunnel at 50 and 60 ºC temperatures and air velocities of 0.42 and 0.84 m/s. The results show that the samples with ethanol experienced faster water evaporation during drying experiments, thereby reducing the drying time by up to 35%, and also had higher yields of coumarin. Storage experiments and color analysis were also performed. Treatment of dried guaco leaves with ethanol resulted in color degradation, but increased shelf life by 20%.

Resumo Este estudo foi realizado para avaliar as atividades antibacteriana, citotóxica e antioxidante de extratos de Morus nigra L. HPLC foi utilizado para determinar o perfil de compostos fenólicos do extrato etanólico bruto (Mn-EtOH). O efeito antibacteriano foi avaliado através do método de microdiluição. A citotoxicidade foi testada contra linhagens celulares de tumores humanos utilizando o ensaio do brometo de 3-(4,5-dimetil-2-tiazolil)-2,5-difenil-2H-tetrazólio (MTT). O conteúdo total de compostos fenólicos e flavonoides também foi avaliado por meio dos métodos de Folin-Ciocalteu e cloreto de alumínio, respectivamente. A atividade antioxidante dos extratos foi avaliada por meio do sequestro do radical livre 2,2-difenil-1-picrilhidrazil (DPPH) e co-oxidação do sistema β-caroteno-ácido linoleico. A presença de compostos fenólicos em Mn-EtOH foi confirmada utilizando HPLC. Os extratos mostraram atividade contra a maioria dos microrganismos testados. Os extratos não mostraram qualquer efeito antiproliferativo expressivo na avaliação da citotoxicidade. O conteúdo fenólico total mais significativo foi de 153,00 ± 11,34 mg de equivalente de ácido gálico/g para o extrato acetato de etila (AcOEt). O conteúdo de flavonoides totais foi de 292,50 ± 70,34 mg de equivalente de catequina/g para o extrato AcOEt, que apresentou a melhor atividade antioxidante (IC50 50,40 ± 1,16 mg/mL) para o sequestro do DPPH. Podemos concluir que esta espécie apresenta forte atividade antibacteriana e antioxidante, bem como fraca atividade citotóxica.

Abstract This study was carried out to assess the antibacterial, cytotoxic and antioxidant activities of extracts of Morus nigra L. HPLC was used to determine the fingerprint chromatogram of the crude ethanolic extract (Mn-EtOH). The antibacterial effect was assessed through the method of microdilution. The cytotoxicity was tested against human tumour cell lines using the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The total phenolic and flavonoid contents were also assessed through the Folin-Ciocalteu and aluminum chloride methods, respectively. Antioxidant activities of the extracts were evaluated by using 2,2-diphenyl-1-picrylhydrazil (DPPH) radical scavenging and β-carotene-linoleic acid bleaching methods. The presence of phenolic compounds in Mn-EtOH was confirmed using HPLC. The extracts showed activity against most microorganisms tested. The extracts did not show any expressive antiproliferative effect in the assessment of cytotoxicity. The most significant total phenolic content was 153.00 ± 11.34 mg of gallic acid equivalent/g to the ethyl acetate extract (AcOEt). The total flavonoid content was 292.50 ± 70.34 mg of catechin equivalent/g to the AcOEt extract, which presented the best antioxidant activity (IC50 50.40 ± 1.16 μg/mL) for DPPH scavenging. We can conclude that this species shows strong antibacterial and antioxidant activities, as well as weak cytotoxic effects.

Abstract The performance of Salvinia natans macrophyte to recover lead and chromium from single and bicomponent solutions in batch and fixed bed systems was investigated. Equilibrium data were obtained through isotherms and fitted to Langmuir, Freundlich and D-R models for a single component system. In the fixed bed study the breakthrough curves were carried out at three different ratios of concentrations for the bicomponent study and at the concentration of 1 mmol.L-1 for the single system. In order to know the biosorption mechanism, FT-IR analyses were performed for S. natans before and after the uptake of metal ions. The results showed different functional groups in the biomass and the ability of these groups to bind Cr+3 and Pb2+. Studies of the binary system of Cr3+/Pb2+ are not common in the literature, which makes the experimental data obtained in this work very important for providing information that could be used in adsorption processes.

The bentonitic clays show good adsorptive characteristics, being used as alternative material for removing metals. This study evaluates several treatments (calcination, acid activation and treatment with sodium) of bentonite type Bofe in the removal of nickel and copper. Analyses were performed for physicochemical characterization of clay using the techniques: X-ray fluorescence (XRF), thermal analysis (TG and DTA), X-ray Diffraction (XRD), the ethylene glycol monoethyl ether (EGME) method, N2 adsorption (BET) and Scanning Electron Microscopy (SEM). Among the changes induced by acid activation and sodium transformations, the treatment with sodium chloride in fixed bed showed the highest performance in the monocomponent removal of nickel and copper.

This study aims to characterize the complex metal-clay formed by adsorption of lead. In this work, the bentonite clay named Fluidgel was calcined at 750 ºC and was used as adsorbent for lead removal. The characterization of this clay and complex metal-clay was carried out by X-ray diffraction (XRD), Fourier transformer infrared spectroscopy (FTIR), surface area (BET method), scanning electron microscopy (SEM) and chemical composition by energy dispersive X-ray (EDX). The removal of lead from aqueous solution was carried out in a fixed bed. Dynamic experiments were performed to evaluate the effect of flowrate on adsorption efficiency. The experiments were accomplished at room temperature, the clay adsorbent particle diameter was of 0.855 mm and the flow rate varied from 0.6 to 2 mL/min. The feed concentration of lead was about 0.24 mmol/L. Comparing the chemical compositions of the clays obtained by EDX before and after removal of the lead, it was concluded that the ion exchange process might be important to lead removal. From the semi-quantitative analysis of chemical composition in clays with and without adsorbed lead it was observed a reduction of the amount of Ca2+, K+ cations and the disappearance of Na+ cations, which was caused by cation exchange process.

This study evaluated the kinetic adsorption of Pb and Cu ions using rice husk ash as adsorbent in a fixed bed. The maximum adsorption capacities obtained for lead and copper ions in the fixed bed were 0.0561 and 0.0682 mmol/g (at 20 ºC), respectively. The thermodynamic studies indicated that the lead adsorption process was exothermic and spontaneous, while the copper adsorption process was endothermic and spontaneous. Characterization results indicated the presence of several functional groups, amorphous silica and a fibrous and longitudinal structure of rice husks. Rice husk ash (RHA) from northern Brazil can be used as a bioadsorbent for the individual removal of Pb(II) and Cu(II) ions from metal-containing effluents.

Este trabalho objetiva avaliar as cargas ambientais de concretos fabricados com cimento Portland contendo diferentes proporções de escória granulada de alto-forno (egaf) em substituição ao clínquer e com resistência carcaterística variando de 25 a 60 MPa. O método de avaliação de impactos CML 2001 v. 2.04 e a paltaforma de Avaliação de Ciclo de Vida SimaPro 7.3 deram suporte ao cálculo das categorias de impacto e de um conjunto de indicadores de ciclo de vida, respectivamente. A vida útil, estimada por meio do software Life 365 v.2.1, é testada como unidade funcional normalizadora para a avaliação ambiental dos elementos de concreto por meio da aplicação do indicador CO2 incorporado. Os valores dos indicadores, com exceção da pegada de água azul, evidenciam que o aumento das frações de egaf no cimento Portland reduz as cargas ambientais do ciclo de vida do concreto. Discutem-se os efeitos da substituição do clínquer sobre os indicadores. Aconsideração da vida útil provou agregar coerência à interpretação da qualidade ambiental, funcional e técnica do concreto.

This paper assesses environmental loads of concretes made with Portland blended cements containing different proportions of ground granulated blast furnace slag (ggbs) as clinker replacement and with characteristic compressive strength ranging from 25 to 60 MPa. Impact assessment method CML 2001 v. 2.04 and Life Cycle Assessment platform SimaPro 7.3 respectively supported calculations in terms of environmental impact categories and of a set of life cycle indicators. Service life, estimated via Life 365 v.2.1 software, is tested as a functional unit normalizer for environmental assessment of concrete elements through application to the embodied CO2 indicator. Increased fractions of ggbs in Portland cement reduce concretes' life cycle environmental loads as indicated by all metrics but blue water footprint. Effects of clinker replacement on the indicators are discussed. Service life consideration proved to add coherence to concrete's environmental, functional and technical quality interpretation.

Este artigo objetiva avançar na validação de indicadores de sustentabilidade com base em ciclo de vida de diferentes sistemas de laje, bem como investigar tendências entre indicadores ambientais de um pavimento-tipo e da superestrutura. Três edificações residenciais em lajes nervuradas em concreto armado (RCW) ou lisas protendidas (PCF) são analisadas em ambiente marinho. Indicadores ambientais são calculados com o apoio do software SimaPro 7.3. Estimativa de vida útil é usada para garantir a equivalência funcional e formar uma base para cálculo de custos do ciclo de vida (CCV). Lajes PCF apresentaram melhores resultados técnico-funcionais e econômicos, mas os ambientais foram superados pelas lajes RCW. A maioria dos indicadores ambientais mostrou a mesma tendência no pavimento-tipo e na superestrutura.

This paper aims at advancing on the validation of indicators of building concrete frames' sustainability from an integrated, life cycle perspective. A case study approach investigates (i) feasibility of comparing sustainability performance of different flooring systems; and (ii) similarity between environmental indicators trends for a typical flooring system and corresponding whole superstructure. Three residential buildings are analyzed, using either prestressed concrete flat (PCF) slabs or reinforced concrete waffle (RCW) slabs and flat beams exposed to a marine environment. SimaPro 7.3 supports calculation of the environmental indicators. Service life estimation is used to ensure functional equivalence and to form a basis for life cycle costing. PCF slabs showed best functional/technical and economic results but were outperformed by RCW slabs' environmental results. Most environmental indicators showed the same trend for both typical floor and whole superstructure.

A aplicação de argilas para adsorção de metais pesados presentes em efluentes tem sido objeto de estudo em muitas pesquisas em virtude das inúmeras vantagens técnicas e econômicas. Este trabalho teve como objetivo obtenção de isotermas de adsorção de níquel e zinco em coluna de leito fixo utilizando como adsorvente argila bentonita calcinada a 500 ºC. Os experimentos para remoção de níquel e zinco foram conduzidos à temperatura ambiente (20 ºC - 25 ºC), pH da alimentação ajustado em 4,5, massa de argila calcinada de 15,5 g, com diâmetro médio de 0,855 mm, vazão de alimentação de 4 mL/min e concentração da solução de metal variando entre 0,5 meq/L a 4 meq/L. Os modelos de isoterma de Langmuir, Freundlich, Langmuir-Freundlich, Radke-Prausnitz, Redlich-Peterson, Sips e Toth foram ajustados aos dados de equilíbrio, sendo que o modelo de Langmuir apresentou melhor ajuste às concentrações de Ni2+ e Zn2+ adsorvido.

The use of clays for adsorption of heavy metals in wastewater has been studied in many trials because of numerous technical and economic advantages. This work aimed to evaluate the removal of nickel and zinc in fixed bed column. The experiments for the removal of nickel and zinc were conducted at room temperature (20 ºC - 25 ºC), pH adjusted at 4.5, weight of 15.5 g calcined clay,with an average diameter of 0.855mm, feeding flow rate 4 mL/min and concentration of the solution of metal between 0.5 meq/L to 4 meq/L. The Langmuir, Freundlich, Langmuir-Freundlich, Radke-Prausnitz, Redlich-Peterson, Sips and Toth models were fitted to equilibrium data, and the Langmuir model provided the best fit for adsorption isotherms.

Heavy metal removal by adsorption using rice husks as a bioadsorbent was evaluated as an alternative for wastewater treatment. Batch equilibrium experiments and kinetic sorption studies were performed using monocomponent solutions of Ni(II), Cd(II), Zn(II), Pb(II) and Cu(II) in surface samples of in natura(RH) and calcined rice husks (RHA). RHA showed higher potential for removing lead and copper. Experimental data for adsorption isotherms of lead and copper were adjusted by Langmuir, Freundlich and Dubinin-Radushkevick (D-R) models, being better represented by the Langmuir model. The calcination of RH increased its surface area, improving its adsorption properties. From a morphological analysis obtained by SEM and diffraction patterns (XRD), a longitudinal fibrous and amorphous structure was observed for RH. TGA resultsindicated a total mass loss of around 60% for RH and 24.5% for RHA.

This study analyzed the influence of the following parameters: overall volumetric heat transfer coefficient, coefficient of heat loss, drying rate, specific heat of the solid and specific heat of dry air on the prediction of a model for the fertilizer drying in rotary dryers. The method of parametric sensitivity using an experimental design was employed in this study. All parameters studied significantly affected the responses of the drying model. In general, the model showed greater sensitivity to the parameters drying rate and overall volumetric heat transfer coefficient.

A implementação de especificações por desempenho, apesar de apresentarem alguns desafios, trazem uma oportunidade para o aumento da vida útil das estruturas de concreto. Este trabalho apresenta sugestões para a modificação das especificações e normas brasileiras a fim de que sigam a tendência mundial e passem de prescrição ao desempenho. São também apresentadas diretrizes para a criação de especificações por desempenho de concretos, incluindo sugestões para os requisitos de desempenho, bem como os aspectos estratégicos, táticos e operacionais de sua implementação no Brasil. Estas diretrizes têm como base especificações adotadas em outros países, modelagem matemática e trabalhos experimentais.

Guidelines to develop performance specifications of concrete, including suggestions for performance requirements, are presented. This paper proposes changes to the Brazilian specifications and standards in order to follow the international trend and to move from prescription to performance. Although, the implementation of performance specifications may pose some challenges, it brings an opportunity to increase the service life of concrete structures. The strategic, tactic and operational aspects of performance specification's implementation in Brazil are presented, as well. These guidelines are based on specifications already adopted by other countries, on mathematical modeling and on experimental work.